brake pads AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual
Page 51 of 111
51
Brake pad thickness, checking
Inspection service:
Dimension -a- = pad thickness including backing plate. Wear limit = 7 mm
(0.28 in.).
Thoroughly remove all dirt from wheels.
If pad thickness including backing plate is 7 mm (0.28 in.) or less the
brake pads have reached or exceeded wear limit and must be replaced. - Determine thickness of outer and inner pads by inspecting visually.
View through opening in wheel. Use a flashlight and mirror if necessary.
- Tighten wheel bolts to 110 Nm (81 ft lb).
Pa
ge 51 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6
Page 54 of 111
54
Inspection service:
- Always consider brake pad wear when checking
brake fluid level. When driving, a slight drop in
brake fluid level results from normal wear and
automatic adjustment of brake pads.
- If brake fluid level is at minimum marking or
slightly above, brake pads are close to wear
limit, it is not necessary to add fluid.
- If brake pads are new or well away from wear
limit, brake fluid level must be between min. and
max. markings.
- If brake fluid level has dropped below min.
marking, check brake system before adding
brake fluid.
Pa
ge 54 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6